Xinxiang jinrui machinery factory
High quality products are the golden key to open the market door
Add to Cart
Reduce operating noise. Because the rollers are connected flexibly, the relative changes in the position of each parallel roller in the roller group can absorb and eliminate vibration and impact, so that the operation becomes stable. The buffer roller is installed in the conveyor. The receiving part of the machine is used to protect the heat-resistant conveyor belt products. Each roller of it is made of elastic discs equipped with a certain interval. The rated load parameters are the same as the national standard requirements. It is used in the transportation of heavy and bulk materials. Under the circumstances, the requirements for on-site use can be fully satisfied. It is convenient to replace the idler. If one idler is damaged, the idler set can be out of contact with the conveyor belt under the condition of uninterrupted transportation, which is convenient for replacement at any time. If a rigid fixed roller is used, the machine must be stopped when replacing the roller, which will cause inconvenience
2. Main function and scope of application
There are many types of trough rollers, which are widely used in open-air dusty and corrosive environments, such as power plants, steel plants, cement plants, salt plants, fertilizer plants, docks, etc.
4.3, All of package are wrapped by 0.5mm steel belt to further strengthen.
| No. | Part | Description | |||
| 1 | Tube | Steel(Q235), Stainless Steel | |||
| 2 | Shaft | Uncoated steel(C45 steel), stainless steel | |||
| 3 | Bearing housing | Stamping(Steel) | |||
| 4 | Bearing | Precision ball bearing,2RZ,C3 | |||
| 5 | Seal | Labyrinth Seal (Nylon) | |||
| 6 | Disc | Rubber Disc | |||