Xinxiang jinrui machinery factory
High quality products are the golden key to open the market door
Add to Cart
I. Characteristics of rigid impeller feeder device
The impeller feeder's structure is compact, the shape is beautiful, and the use is convenient.The operation is stable and the noise is low.
Because the bearing and tooth box are some distance from the shell, the high temperature lubrication has been greatly improved.
Our factory can also be designed and manufactured according to the requirements of users. (support coupling belt chain drive)
II. Working principle and structural characteristics
The rigid impeller feeder is mainly composed of shell, impeller and end cover. Reducer, transmission shaft, impeller as one, reliable, light and energy saving. Because the bearing and reducer of the machine are protruding outward, the phenomenon that dust can be squeezed into the bearing and large particle material can be avoided. When working, the deceleration motor drives the impeller to rotate through the coupling, the material in the upper part of the shell is brought evenly to the lower part, and the material is transported away by the next device.
III. Instructions for use
1. Check whether the motor wiring is correct and reliable before use, and whether to install overload protection.
2. This product has been added No. 00 lithium grease before leaving the factory.
3. This product is suitable for powder dry materials and fine particle dry materials, such as high humidity and high viscosity materials, high temperature materials need to be customized separately.
4. The safety should be paid attention to when starting, and the hand should not be extended to the rotor part.
IV. Technical Datas
YJD B Model Rigid Impeller Feeder Parameter
| Model | YJD2 | YJD4 | YJD6 | YJD8 | YJD10 | YJD12 | YJD14 | YJD16 | YJD18 | YJD20 | |
| Name | |||||||||||
| Capacity(L/R) | 2 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | |
| r/min | 25-40 | ||||||||||
| Temp(℃) | T ≤80℃ when temp is more than 80 ℃,need to custom made. | ||||||||||
| Product | Powder or fine particles | ||||||||||
| Motor | KW | 0.55 | 0.75 | 1.1 | 1.5 | ||||||
| r/min | 1300 | 1300 | 1400 | 1430 | |||||||
YJD B Rigid Impeller Feeder Size
FORM1 mm
| Model | φA | φB | φC | E | F | M | H | h | φ |
| YJD02 | 250 | 210 | 150 | 650 | 420 | 122.5 | 225 | 12 | 9 |
| YJD04 | 280 | 240 | 180 | 758 | 526 | 140 | 280 | 15 | 11 |
| YJD06 | 300 | 260 | 200 | 778 | 536 | 150 | 300 | 15 | 11 |
| YJD08 | 320 | 280 | 220 | 798 | 546 | 160 | 320 | 18 | 11 |
| YJD10 | 340 | 300 | 240 | 880 | 628 | 170 | 340 | 18 | 13 |
| YJD12 | 360 | 320 | 260 | 900 | 638 | 180 | 360 | 18 | 13 |
| YJD14 | 380 | 340 | 280 | 920 | 648 | 190 | 380 | 20 | 17 |
| YJD16 | 400 | 360 | 300 | 960 | 678 | 200 | 400 | 20 | 17 |
| YJD18 | 440 | 380 | 320 | 980 | 688 | 220 | 440 | 22 | 17 |
| YJD20 | 450 | 400 | 340 | 1000 | 698 | 230 | 460 | 22 | 17 |
FROM2 mm
| Model | A | B | C | E | F | M | H | h | φ |
| φ300*450 | 450 | 390 | 300 | 1120 | 690 | 225 | 450 | 20 | 12-Φ22 |
| φ350*450 | 490 | 445 | 350 | 1200 | 700 | 250 | 500 | 25 | 12-Φ22 |
| φ400*500 | 520 | 480 | 400 | 1200 | 700 | 250 | 500 | 25 | 12-Φ22 |
| φ500*680 | 630 | 580 | 500 | 1500 | 1100 | 340 | 680 | 25 | 12-Φ22 |