Xinxiang jinrui machinery factory
High quality products are the golden key to open the market door
Add to Cart
The inclined belt conveyor is mainly composed of several major components, such as a driving device, a transmission roller, a redirecting roller, a conveyor belt, a roller component, a tensioning device, a supporting member, and a safety protection device. The features are below:1.Easy loading and unloading. The belt conveyor can be loaded and unloaded at any point according to the needs of the process.2.Strong adaptability to the line. The conveying line can be horizontal or inclined, or it can be bent horizontally or vertically, so it is less restricted by terrain conditions.3.High reliability. Due to the simple structure and the light weight of the moving parts, as long as the conveyor belt is not torn, the service life can be as long as ten years, and the metal structural parts will not be damaged for decades if they are rust-proof.4.Less maintenance costs. The moving parts of the belt conveyor are only rollers and idlers, and the conveyor belt is very wear-resistant. Compared to other conveying machines, there are far fewer wear parts.In addition, the belt conveyor also features low operating costs, low capital investment, low energy consumption, and high efficiency.
Belt conveyor consists of two or more pulleys, with a continuous loop of material - the conveyor belt - that rotates about them. One or both of the pulleys are powered, moving the belt and the material on the belt forward.In addition, the belt conveyor also features low operating costs, low capital investment, low energy consumption, and high efficiency.The universal belt conveyor is mainly composed of several parts, such as a frame, an adhesive tape, an electric roller, a supporting roller, a tensioning device and a support frame. After the tape passes through the rollers at both ends, the two ends are joined together with a tape clip or a vulcanization method to make the closed loop structure. The tape is supported by the upper and lower supporting rollers, and the tape is tightened by a tensioning device with a certain tension. When the drum motor rotates, the friction between the drum motor and the adhesive tape is continuously operated with the tape, thereby unloading the cargo loaded on the tape from the unloading drum.
Belt conveyors are the logistics and transportation machinery widely needed in many industrial sectors. Due to the variety and wide specifications of belt conveyors, it can be applied to the logistics and transportation requirements of chemical, light industry, food, food, building materials, post and telecommunications, and many other departments; it can also meet various operations such as docks, storage yards, warehouses, and workshops. Line transportation requirements. Belt conveyors use belts, steel belts, steel fiber belts, plastic belts, and chemical fiber belts as conveyors to transport materials and haul workpieces. Its characteristic is that the conveyor belt that carries the material is also a traction member that transmits power, which is significantly different from other conveyor machinery. It is the most widely used type in continuous conveyors, and it is mainly belt.
♦ Material to be processed: _____
♦ Max. granule size of the feeding material: _____mm
♦ Handling capacity (Ps. It means the total
♦ Layer number: ______
material capacity feeding from the inlet): _____t/h
♦ Mesh size of each layer: _____mm
♦ Bulk Density: _____t/m3
♦ Particle distribution percentage:____________
♦ Material temperature: _____℃; (please check the following example to help you
♦ water content:____% understand it.Supposing the layer number is 2
♦ Material is corrosive or not: ____ (Ps. Yes or No) and the aperture size of each layer is 10mm and 5mm,
♦ Material is sticky or not: ____ (Ps. Yes or No) then you will get 3 kinds of products: X,Y and Z.
♦ Working environment is indoor or outdoor: _____ X≥10mm; 5mm≤ Y < 10mm; Z<5mm.
♦ Working environment temperature: ______ ℃ We want to confirm the following information:
♦ Upstream equipment (Ps. It means what kind of 1)The percentage of X in the whole material:_____%;
equipment is used to feed the material): _____ 2)The percentage of Y in the whole material:_____%;
♦ Downstream equipment (Ps. It means what kind of 3)The percentage of Z in the whole material:_____%;)
equipment is used to discharge the material): _____
♦ Working power supply: _____V ______HZ
| Belt Width | Section Form | Speed | Max Capacity |
| 800mm | Though | 1.0m/s | 278t/h |
| 1.25m/s | 348t/h | ||
| 1.6m/s | 445t/h | ||
| 2.0m/s | 546t/h | ||
| Flat | 0.8m/s | 118t/h | |
| 1.0m/s | 147t/h | ||
| 1.25m/s | 184t/h | ||
| 1.6m/s | 236t/h | ||
| 2.0m/s | 289t/h |
