Ss304 Rotary Valves Impeller Feeding Machine For Sawdust Pellets

Different Types Applications Specifications Rotary valves Impeller Feeding Machine

I. Summarize of rotary valves

The Rotary Valves are the main machine for dust discharge, air supply and other equipment feeding, which is suitable for powder materials and granular materials, Rotary Valves are widely used in environmental protection, chemical industry,metallurgy, grain, food and other industrial sectors.

Features are below:

a. The Rotary Valves is Smooth operation and low noise;
b. The Rotary Valve has high processing precision and air locking function. It can be used as the quantitative feeder of powder in crushing and classification systems, and as the unloader of separation, dust collection and other systems.
c. Because the bearing and the tooth shell are at a distance from the box, the high temperature lubrication has been greatly improved.
d. Cast iron, cast steel, stainless steel, can be used, and the flange can be square or circular , other structural forms to meet the different needs of users.

II. Working principle of rotary valves

The rotary valve is equipped with a cycloid reducer, which is directly and rigidly connected to the main shaft through the reducer shaft, so as to drive the main shaft and impeller rotation. The impeller is equipped with a number of impeller pieces, which are equipped with rubber sealing pieces, pressed by a pressure plate, and the sealing pieces are close to the inner wall of the shell. When the motor rotates, the main shaft and impeller rotate at the same time, and the material enters the impeller slot from the upper bin through the inlet, and the rotating impeller takes the material to the outlet and feeds it out.

III. Instructions for use of rotary valves

1. Check whether the motor wiring is correct and reliable before use, and whether to install overload protection.

2. This product has been added No. 00 lithium grease before leaving the factory.

3. This product is suitable for powder dry materials and fine particle dry materials, such as high humidity and high viscosity materials, high temperature materials need to be customized separately.

4. The safety should be paid attention to when starting, and the hand should not be extended to the rotor part.

IV. Technical Datas

YJD A Model Rigid Impeller Feeder Parameter