Xinxiang jinrui machinery factory
High quality products are the golden key to open the market door
Add to Cart
The shaftless screw conveyer is driven by the motor to run the cycloidal reducer, and the screw rotates by the drive of the mechanical seal shaft and the connecting disk on the shaftless screw body, and when the material is discharged to the inlet at the top of the U-shaped trough, the material is discharged by the outlet at the bottom of the U-shaped trough through the screw drive.
Shaftless screw conveyor is mainly composed of drive device, head assembly, housing, shaftless screw body, trough liner, inlet, outlet, cover (if needed), base, etc.
Drive device: Adopt cycloid wheel reducer or shaft-mounted hardened gear reducer, and design the drive device at the outlet end as far as possible, so that the spiral body is in a state of tension during operation.
The head is assembled with thrust bearing, which can bear the axial force generated when conveying materials.
Housing: The housing is U type or O type, and the material is stainless steel or carbon steel.
Tank liner: material is high molecular polyethylene wear-resistant liner
Inlet and outlet: There are two kinds of inlet and outlet: square and round, and the general inlet and outlet forms are decided by users.
1. The operation and conveying process are safe and reliable.
2. Flexible transportation, multiple loading and unloading points can be set up according to requirements.
3. The conveying capacity is large, and the material is pushed and conveyed by the weight of the material itself, which greatly reduces the power consumption.
4. During the conveying process, the screw device can complete the effects of mixing, stirring and cooling.
5. High tightness to reduce dust.
6. Fixed or mobile screw conveyors can be set up according to requirements, increasing the working mode can be optional.
III. Applictaion of Shaftless Screw Conveyer
Shaftless screw conveyers can convey materials that traditional shaft screw conveyers and belt conveyers cannot or are difficult to convey, such as semi-fluid and viscous materials,easy to wind and easy to block Materials,wet and pasty materials, mainly used in environmental protection,chemical industry, papermaking and other industries to transport materials with strong adhesion, paste-like viscous materials (such as waste paper pulp, chemical raw materials, malt, sludge, etc.) and easily entangled materials (such as domestic garbage)
| Model | Screw Diameter(mm) | Speed(r/min) | Capacity(m3/h) |
| WLS150 | 148 | 60 | 5 |
| WLS200 | 180 | 50 | 10 |
| WLS250 | 233 | 45 | 15 |
| WLS300 | 278 | 40 | 25 |
| WLS400 | 365 | 30 | 40 |
| WLS500 | 470 | 25 | 65 |
| Material to be processed: _____ | Working environment is indoor or outdoor:________ |
| Handling capacity: ________per hour | Working environment temperature: _______ ℃ |
| Bulk Density: _____t/m3 | Installation form is horizontal or inclined : ________ |
| Conveying distance: ________ | If it is inclined,what is the inclined degree_____° |
| Material size:____mm | Water content:____% |
| Material temperature: _______ ℃ | Working power supply: _____V ______HZ ______PH |