Xinxiang jinrui machinery factory
High quality products are the golden key to open the market door
Add to Cart
Working principle of Idler Roller Conveyor
Idler Roller Conveyor is mainly composed of two end drums and a closed conveyor belt tightly sleeved on them. The drum that drives the conveyor belt to rotate is called the driving drum ; the other drum that only changes the direction of the conveyor belt is called the redirecting drum. The driving drum is driven by a motor via a reducer, and the conveyor belt is dragged by the friction between the driving drum and the conveyor belt. The drive drum is generally installed at the discharge end to increase traction and facilitate dragging.
Feature of Idler Roller Conveyor
Easy loading and unloading. The belt conveyor can be loaded and unloaded at any point according to the needs of the process.High reliability. Strong adaptability to the line. The conveying line can be horizontal or inclined, or it can be bent horizontally or vertically, so it is less restricted by terrain conditions. Less maintenance costs.
In addition, the belt conveyor also features low capital investment, low operating costs, high efficiency and low energy consumption.
Application of Idler Roller Conveyor
Idler Roller Conveyor are the transportation and logistics equipment widely needed in many industrials. Because of the variety and wide specifications of belt conveyors, Idler Roller Conveyor can be applied to the logistics and transportation requirements of building materials, chemical, light industry, post and telecommunications and many other departments; Idler Roller Conveyor use belts,steel fiber belts, steel belts, chemical fiber belts and plastic belts as conveyors to transport materials and haul workpieces.
Technical Parameters of Idler Roller Conveyor
| Belt Width | Section Form | Speed | Capacity |
| 650mm | Though | 0.8m/s | 131t/h |
| 1.0m/s | 164t/h | ||
| 1.25m/s | 206t/h | ||
| 1.6m/s | 264t/h | ||
| 2.0m/s | 323t/h | ||
| Flat | 0.8m/s | 67t/h | |
| 1.0m/s | 88t/h | ||
| 1.25m/s | 110t/h | ||
| 1.6m/s | 142t/h | ||
| 2.0m/s | 172t/h |
Selection Conditions of Idler Roller Conveyor
Handling capacity:_____
Material to be processed: _____
Bulk Density: _____t/m3
Material temperature: _____℃
Water content:____%
Material is corrosive or not: ____
Material is sticky or not: ____
Working environment temperature: ______ ℃
Working voltage:____V_____hz_____phase