Xinxiang jinrui machinery factory
High quality products are the golden key to open the market door
Add to Cart
The large-angle corrugated sidewall conveyor belt is also called the skirt baffle conveyor belt. The rib plays a role in preventing the material from slipping and falling. In order to facilitate bypassing the drum, the ribs are designed to be corrugated; the function of the diaphragm is to support the material, in order to achieve large inclination conveying, the T-type TC type is used. The ribs and the diaphragm are connected with the base tape by the method of secondary vulcanization, which has a high connection strength. It is used for conveying powdery, granular, small block, pasty and liquid materials that are easily scattered.
1. Can be sealed and environmental friendly
2. Larger production grain sizes can be handled
3. Reduced energy consumption to save money for you
4. Able to conveyor material at any angles up to 90 degree to save space for you
5. Extremely high stability is provided in the traverse direction, good longitudinal flexibility
6. Low maintenance requirements
7. Hot vulcanization provides 5 times greater adhesion between the belt and sidewall, eliminating the need for bolting the sidewall to the base belt.
8. No spillage with steep angle conveying,long lifespan
| Belt Width(mm) | 500 | 650 | 800 | |||||||
| Side wall Height(mm) | 80 | 120 | 120 | 160 | 120 | 160 | 200 | 240 | ||
| Part angle throughput | 30° | 46 | 71 | 104 | 120 | 128 | 157 | 195 | 235 | |
| (m³/h) | 45° | 35 | 57 | 83 | 97 | 102 | 127 | 157 | 195 | |
| 60° | 25 | 40 | 58 | 69 | 72 | 90 | 112 | 142 | ||
| 90° | 13 | 21 | 31 | 37 | 38 | 48 | 60 | 76 | ||
| Dimensions | height of first rollerH2/h(mm) | 1100-2000 | 1300-2000 | 1300-2000 | ||||||
| height of tail roller | 600 | 600 | 600-800 | |||||||
| H2/h(mm) | ||||||||||
| height of belt surface H2/h(mm) | 760-800 | 800-850 | 800-1115 | |||||||
| width of ancho | 870 | 1020 | 1220 | |||||||
| B2/h(mm) | ||||||||||
| Belt Width(mm) | 1200 | 1400 | ||||||||
| Side wall Height(mm) | 160 | 200 | 240 | 300 | 160 | 200 | 240 | 300 | 400 | |
| Part angle throughput | 30° | 275 | 331 | 419 | 466 | 319 | 395 | 500 | 564 | 794 |
| (m³/h) | 45° | 222 | 267 | 347 | 384 | 258 | 318 | 414 | 465 | 680 |
| 60° | 158 | 190 | 253 | 178 | 184 | 226 | 302 | 337 | 524 | |
| 90° | 85 | 102 | 136 | 149 | 98 | 121 | 162 | 180 | 281 | |
| Dimensions | height of first rollerH2/h(mm) | 1400-2000 | 1600-2000 | |||||||
| height of belt surface H2/h(mm) | 800-1000 | 800-1200 | ||||||||
| height of belt surface H2/h(mm) | 1050-1500 | 1050-1700 | ||||||||
| width of ancho | 1690 | 1890 | ||||||||
| B2/h(mm) | ||||||||||
Selection Conditions
| ♦ Material to be processed: _____ | ♦ Max. granule size of the feeding material: _____mm |
| ♦ Handling capacity (Ps. It means the total | ♦ Percentage of Max. granule in material:_________% |
| material capacity feeding from the inlet): _____t/h | ♦ Upstream equipment (Ps. It means what kind of |
| ♦ Bulk Density: _____t/m3 | equipment is used to feed the material): _____ |
| ♦ Material temperature: _____ºC; | ♦ Downstream equipment (Ps. It means what kind of |
| ♦ Water content:____% | equipment is used to discharge the material): _____ |
| ♦ Material is corrosive or not: ____ (Ps. Yes or No) | ♦ Working power supply: _____V ______HZ |
| ♦ Material is sticky or not: ____ (Ps. Yes or No) | ♦ Please refer to the following picture and provide the |
| ♦ Working environment is indoor or outdoor | relevant parameters:L1____m, L2___m, H___m, α____° |
| or indoor and outdoor: ______________ | Working environment temperature: ______ ºC |