Xinxiang jinrui machinery factory
High quality products are the golden key to open the market door
Add to Cart
The Z Shape Corrugated Side Wall Belt Conveyor Machine is also known as the corrugated sidewall belt conveyor. It adopts a conveyor belt with corrugated sidewalls and diaphragms. It is a new type of continuous conveying equipment. Compared with the machine, the conveying capacity is increased by 1.5 to 2 times);
| Belt Width(mm) | 500 | 650 | 800 | |||||||
| Side wall Height(mm) | 80 | 120 | 120 | 160 | 120 | 160 | 200 | 240 | ||
| Part angle throughput | 30° | 46 | 71 | 104 | 120 | 128 | 157 | 195 | 235 | |
| (m³/h) | 45° | 35 | 57 | 83 | 97 | 102 | 127 | 157 | 195 | |
| 60° | 25 | 40 | 58 | 69 | 72 | 90 | 112 | 142 | ||
| 90° | 13 | 21 | 31 | 37 | 38 | 48 | 60 | 76 | ||
| Dimensions | height of first rollerH2/h(mm) | 1100-2000 | 1300-2000 | 1300-2000 | ||||||
| height of tail roller | 600 | 600 | 600-800 | |||||||
| H2/h(mm) | ||||||||||
| height of belt surface H2/h(mm) | 760-800 | 800-850 | 800-1115 | |||||||
| width of ancho | 870 | 1020 | 1220 | |||||||
| B2/h(mm) | ||||||||||
| Belt Width(mm) | 1200 | 1400 | ||||||||
| Side wall Height(mm) | 160 | 200 | 240 | 300 | 160 | 200 | 240 | 300 | 400 | |
| Part angle throughput | 30° | 275 | 331 | 419 | 466 | 319 | 395 | 500 | 564 | 794 |
| (m³/h) | 45° | 222 | 267 | 347 | 384 | 258 | 318 | 414 | 465 | 680 |
| 60° | 158 | 190 | 253 | 178 | 184 | 226 | 302 | 337 | 524 | |
| 90° | 85 | 102 | 136 | 149 | 98 | 121 | 162 | 180 | 281 | |
| Dimensions | height of first rollerH2/h(mm) | 1400-2000 | 1600-2000 | |||||||
| height of belt surface H2/h(mm) | 800-1000 | 800-1200 | ||||||||
| height of belt surface H2/h(mm) | 1050-1500 | 1050-1700 | ||||||||
| width of ancho | 1690 | 1890 | ||||||||
| B2/h(mm) | ||||||||||
Selection Conditions of Z Shape Corrugated Side Wall Belt Conveyor Machine
| ♦ Material to be processed: _____ | ♦ Max. granule size of the feeding material: _____mm |
| ♦ Handling capacity (Ps. It means the total | ♦ Percentage of Max. granule in material:_________% |
| material capacity feeding from the inlet): _____t/h | ♦ Upstream equipment (Ps. It means what kind of |
| ♦ Bulk Density: _____t/m3 | equipment is used to feed the material): _____ |
| ♦ Material temperature: _____ºC; | ♦ Downstream equipment (Ps. It means what kind of |
| ♦ Water content:____% | equipment is used to discharge the material): _____ |
| ♦ Material is corrosive or not: ____ (Ps. Yes or No) | ♦ Working power supply: _____V ______HZ |
| ♦ Material is sticky or not: ____ (Ps. Yes or No) | ♦ Please refer to the following picture and provide the |
| ♦ Working environment is indoor or outdoor | relevant parameters:L1____m, L2___m, H___m, α____° |
| or indoor and outdoor: ______________ | Working environment temperature: ______ ºC |